Flexible Rubber Cables for Mining - APPLICATION
Mining cables are often used to transport power deep into a mineshaft for powering and controlling mining equipment. They’re often subjected to mechanical abuse, extreme weather, extreme temperatures, moisture, abrasion, corrosive agents and highly explosive atmospheres. Due to the unforgiving environment, special standards are mandated for cables and electrical distribution in both open-pit and underground mining.
Flexible Rubber Cables for Mining - STANDARD
MT 818-1999 MT386-95 BS6708 ICEA UL MSHA CSA
CABLES CONSTRUCTION
Conductors: Flexible Tinned Copper
Insulation :90C Ethylene-Propylene Rubber (EPR)
Ground Wires: Flexible Tinned Copper
Ground Check Conductor: Flexible Tinned Copper with yellow insulation
Jacket: Reinforced CPE with permanent surface marking.
Flexible Rubber Cables for Mining - Feature:
1) The allowed operating temperature of the core is 65°C when U0/U is
0.66/1.14kV and below, 85°C when U0/U is 3.6/6kV
2) Min. bending radius is 6 times the size of cable diameter
3) The yellow sheath cable should not be exposed in the sun for long time
4).Coal Mining Machine Cable:The cables are suitable for coal mining machine and similar equipment as power connecting cable.
Flexible Rubber Cables for Mining
Constructional dimension and technical parameter
|
Cores No. × Cross-sectional area mm2 |
Approx. overall diameter mm |
Phase Core Insulation Resistance at 20°C ≥MΩ•km |
kg/km Approx. weight kg/km |
|
3×16+1×16 |
58.5-63.5 |
610 |
4648 |
|
3×25+3×10 |
56.2-61.2 |
550 |
5168 |
|
3×35+3×10 |
59.2-64.2 |
500 |
5861 |
|
3×50+3×16 |
63.1-68.1 |
440 |
7166 |
|
3×70+3×16 |
69.5-74.5 |
390 |
8771 |
|
3×95+3×16 |
74.0-79.0 |
350 |
10126 |
|
3×120+3×25 |
79.0-84.0 |
330 |
11827 |
|
3×150+3×25 |
83.3-88.3 |
300 |
13554 |
|
3×185+3×35 |
87.6-93.6 |
280 |